Welcome To BEA

The shares of both Olympic Steel Inc. and Ternium S.A. are owned by institutional investors at 66.7% and 19.7% respectively. About 14.8% of Olympic Steel Inc.’s share are held by insiders. Comparatively, Ternium S.A. has 0.1% of it’s share held by insiders.

Physical etching is another possible method. Cathodic or reactive sputtering are two types of physical etching, and can be useful for weak reflecting samples, e.g. some types of ceramics. For proper etching in these methods, special chambers and defined vacuum are essential. Thermal etching is another type of physical etching, and is frequently used for titanium or ceramics. In this case, diffusion processes are triggered to realize an equilibrium state between interface energy and the surface, to make the microstructure visible.

National Stainless Steel Centre chose to concentrate on process stainless steel, high alloys, duplex and super duplex with the latest processing technology available

After interviewing all my people, they wrote job descriptions for everybody. We didn’t need that sort of thing—we knew what we were doing. And I have to admit, it wasn’t a very sophisticated operation we had, but it worked. But they divided everything into its cost-center, down to the last nut, bolt, and screw. We had more cost-centers than you could ever imagine. Everything had to be moved from one cost-center to another cost-center for corporate bookkeeping. The burden became horrendous.

The method discussed above illustrates the principle of preparation for most metals and alloys. In steel producing plants and hardening shops, where a high sample throughput needs to be achieved, Buehler has enhanced the preparation considerably by utilizing the latest consumables and equipment. The process cycle time has improved by increased material removal rate after the initial grinding step.

Retail product development “We are not a company that can sit still for long. We are always looking for the next phase of development and although this one is completely new to us it still fits into our mix. It certainly does not detract from the stainless steel processing, which is the core of National Stainless Steel Centre.”

Complexity has a high cost in CNC: geometries that require special tooling or fixtures, multiple machine setups or specialty materials will cost considerably more.

After two years of restoration, and a bit of tweaking here and there, Gary’s 1965 Corvette is ready for action. Gary has entered the car in several shows, including the Corvette Expo, where it was well received by Corvette enthusiasts, young and old. Gary’s creation captured our attention at first glance and has kept it ever since. The nostalgic appearance takes you back to a simpler time, while the modern performance parts help Gary and Debby get down the road safely and dependably. It’s a perfect collaboration of old and new, and even though it usually stays pretty close to home in Knoxville, Tennessee, we’re glad to share Gary’s 1970’s-inspired vision with Corvette owners around the world. Vette

The market for Eddy Current testing is growing at close to 10% CAGR, according to a recent report, and could be worth $1.68 billion by 2022. The factors which are driving this market include advancements in eddy current testing technologies, safety regulations by governments and increasing infrastructure development in emerging economies.

Chan adds that the additional supply of long products from Alliance Steel in Kuantan, if not restricted to the export market, could pose a threat to local players. “I wouldn’t be too surprised if Alliance Steel is the most cost-efficient steel player in Malaysia due to its state-of-the-art manufacturing facilities, economies of scale and technical expertise. I think the new government should strictly enforce Alliance Steel’s focus on the export market to protect the domestic steel market.”

Luckily, your decisions as the designer can greatly affect the final pricing. By following the Design for Machinability tips of this article, you can manufacture parts that are optimized to minimize costs and still comply with your design requirements.

We had signed a no-compete deal. It was like for 10 years or something, probably outrageous at the time. I went to a law firm in LA and they wrote one letter to CBS and that was all it took for me to be able to start another company [Randall Instruments]. I don’t know what happened there after I left Fender, of course, but for the five years or so I was there the quality of the product was not compromised.